Shell Catcher for Franchi Affinity I/II/III

The shell catchers were designed for use on the guns in their factory form. Any additional aftermarket parts such as charge handles or lifters that don't use factory dimensions may not be compatible.

These catchers attach to the top portion of the ejection port and should sit flush and inline with the rib.

With feedback received, it is highly recommended to use double-sided tape when using this shell catcher to keep the catcher in place. The double-sided tape will allow the catcher to be removed and reinstalled as needed. The type of tape can be found here

This shell catcher is compatible with the following Benelli Models.

• Franchi Affinity I
• Franchi Affinity II
• Franchi Affinity III

Currently this only works on the Franchi Affinitys listed above - Pending confirmation that will also work on the Franchi Affinity 3.5

Parts are 3D printed using PLA+.