Shell Catcher for Benelli Cordoba | Ethos Cordoba | BE S.T.

The shell catchers were designed for use on the guns in their factory form. Any additional aftermarket parts such as charge handles or lifters that don't use factory dimensions may not be compatible.

These catchers attach to the top portion of the ejection port and should sit flush and inline with the rib.

With feedback received, it is highly recommended to use double-sided tape when using this shell catcher to keep the catcher in place. The double-sided tape will allow the catcher to be removed and reinstalled as needed. The type of tape can be found here

Note
There are two versions of the Benelli Cordoba | Ethos Cordoba | BE S.T.

1. Benelli Cordoba the top receiver edge is approx. 2.6mm thick.
2. Benelli Ethos Cordoba | BE S.T. the top receiver is approx 2.2mm thick

Please match up your receiver with the photo that is shown. If you are not sure, please contact us before placing your order.

Parts are 3D printed using PLA+.

Demo video from a customer.